Easy Stair Stringers Ideas
Stair stringers are the backbone essentially of your staircase. You better to use high quality of straight pressure treated 2×12’s for stringers of stair. It is recommended to ensure the wood has .60 RET level if you have plan on resting the stringer on the ground. So that able to prepare the stringers that you want to lay out one of your 2×12’s and use a framing square, stair calculator is usable. If you line up the tread depth and the riser height on the framing square and align it to the stringer, then you will be able to find the exact angle in cutting your stairs. This process can be repeated along the stringer. Because the step at the bottom will be the ground, you will find that it is going to be too short by the one tread height.
Right after you have marked the stringers, then you must make an adjustment. Cut off the thickness of one tread to drop the stringer and adjust ground landing. It totally depends on how you want to attach the top step and you may need to make an adjustment additionally to maintain a uniform design of stair. You can use a circular saw to cut but do not cross your guidelines. This will make a bad look and eventually weaken the stringer. Instead, you better use a handsaw to cleanly finish the cut. Once one stringer has been done and accuracy tested, you can use it as a template in producing the others.
Well, beside of wood, metal stair stringers are also applicable to make better quality in strength. Steel is the very best to resist harsh weather conditions especially when it come to outdoor stairs.