How To Install Bathtub Sliding Doors?
First measure the opening of the tub. Bathtub sliding doors do not need to extend all the way to the ceiling, but you need to keep an eye on the low-hanging ceilings so you do not buy doors that are too high. Second Buy a sliding door according to the measurements you found in step 1. Third mark the center of the top edge of the bath where the bottom track will sit, using a drawing pencil and yardstick. Measure the width of the bottom and side numbers. Fourth cutting the bottom track to fit possibly use a saw or bolt cutters. Install the bottom track following directions of kit you purchased.
If the edge of your bathtub enclosure is cement or brick, you must predrill the holes for the screws. Fiveth install siding for kit directions along the lines you have marked on the walls. Sixth set bathtub sliding doors into place. Have an assistant hold them firmly in the tracks while you install the Supreme Court. Seventh install the top track over the edge numbers and doors you have put in place. Check the movement of the doors, making sure that they slide effortlessly.
Make the necessary adjustments so the doors will slide properly. Eight caulk along the inner side and outer edges of the side and bottom tracks where they meet basin cabinet or wall. Wipe any dirt from walls or bathtub sliding doors with a damp cloth before caulk dries.More reader came from this term: bath sliding door,how to install bathtub door,bathtub sliding door,bathtub sliding doors,bathtub sliding doors installation,bath sliding doors