Sliding doors for closets – Among the reasons for removing a sliding closet door are to access all the closet space or take out a home renovation. Different styles of doors have different requirements for disposal. Sliding doors bypass cabinet or may have a toothed track, short rear upper bar lip, or a combination of both. These things allow you to safely remove the doors without causing them or the track wheeling damage.
Slide one of the bypass open doors to access the closet. Examine the door track to determine which type of track is installed. Sliding door tracks have a notch or a solid lead. Solid tracks have a solid bottom flange which stabilizes the roller and a short upper wing angle. Open the sliding doors for closets to access the screws in the guides of the doors lower shunt. Remove the screws on the bottom guide and slide the lower guide, away from the sliding doors.
Lower the upper rollers of the sliding doors for closets with the Phillips screwdriver to remove a door of a roller with notches. This will allow sufficient room to remove the doors. Align the front sliding door with the notches and lift the door slightly to remove the door from the track. Lift the door of his strong track record, if it is based on. To do this, lower the top rollers of the door manual input. Sliding the front sliding door half of the door opening. Grasp the sliding door on both sides.More reader came from this term: designer dog door,exterior door with a built in cat door